Removing the Rover K series…
Before I start this, a word of warning…
DISCLAIMER
If you don’t have access to a suitable garage, tools and you don’t have the experience/competence, please go to the links page and pick out one of the turn-key installs give them a call and get your credit card out.
Start as you mean to go on, take your time and make good any issues you may have before continuing. Prepare well and be safe. Don’t cut corners and make a snagging list for issues. Use Loctite where possible and double check every bolt. Use a torque wrench as prescribed in the service manuals. Mark bolts across the top and over there contact points for visual inspection.
Things will go wrong, so be prepared.
This is only a guide, I accept no responsibility if you injure or kill yourself (or anyone else) whilst doing the work or using the vehicle after the install.
A good job well done will pay dividends with safety, reliability and when you come to sell - so document your progress.
Enjoy the project - its fun and the results are well worth the hard work.
posted in Installation | 0 Comments